Crate Blackheart BH100H Hot Head Guitar Amp Head, 100W All Tube with Attitude Review
Crate Blackheart BH100H Hot Head Guitar Amp Head, 100W All Tube with Attitude Feature
- 100 Watts, Class A or Class AB Operation
- Class AB 100 Watts RMS in (Full Power) Pentode Mode,
- 50 Watts RMS in (Half Power) Triode Mode
- Class A 60 Watts RMS in (Full Power) Pentode Mode,
- 30W RMS in (Half Power) Triode Mode
Awesome Power, Awesome Flexibility Two simple switches open up an endless world of tonal possibilities.
- Class AB/Pentode: 100W of flesh searing power
- Class AB/Triode: 50W, tighter headroom, crisper gain, still hurts
- Class A/Pentode: 60W, lots of headroom before overdrive, nice and plucky
- Class A/Triode: 30W, less headroom, more responsive to your attack
Two-Channels, Separate EQs: The Hothead has two channels (Loud and F'N Loud), each selectable by a mini toggle on the faceplate or remotely via the included footswitch and each voiced through its own, dedicated EQ section. No more switching from one sound to the same sound in the middle of your jam. Dial in two distinct voices and rock on.
- The LOUD Channel (aka "One") is voiced to range from Crisp Cleans to Classic Rock and Heavy Blues tones. Controls: Drive, Level, Treble, Middle, Bass
- The F'N LOUD Channel (aka "Two") is voiced to capture Classic Crunch to Sweet Overdriven Lead tones. Controls: Gain, Level, Treble, Middle, Bass
Tube Effects Loop/Boost Function with Level Control:
Both channels share a Tube Driven Effects Loop that can be run in series or parallel modes (selectable by mini toggle on the amp's rear panel) and then hard bypassed, doubling as a footswitch-activated boost. Send and Return controls act as expected when in Effects loop Mode but allow you to tweak your Boost Volume when your effects are hard bypassed. Admit it...that's cool.
Specifications
- 100 Watts, Class A or Class AB Operation
- Pentode/Triode Switch
- Power Output: Class AB – 100 Watts RMS in (Full Power) Pentode Mode, 50 Watts RMS in (Half Power) Triode Mode, Class A – 60 Watts RMS in (Full Power) Pentode Mode, 30W RMS in (Half Power) Triode Mode
- Two Channels: Channel 1 (LOUD) voiced for Crisp Cleans to Classic Rock and Heavy Blues tones (Drive, Level, Treble, Middle and Bass controls), Channel 2 (F'IN LOUD) voiced to capture Classic Crunch to Sweet Overdriven Lead tones (Gain, Level, Treble, Middle and Bass controls)
- Master Controls (shared by both channels): Master Presence, Master Volume
- Effects Loop: Tube Driven, shared by both channels, can be operated in Series or Parallel Mode
- Effects Loop Bypass, which can also be used as a boost
- Footswitch for Channel Selection and Effect Loop On/Off, with LEDs
- Solid State Rectifier
- DC Powered filaments (preamp) for solid, quiet operation
- 16 gauge, 1.5mm rugged chassis construction with folded and welded corners
- Outputs: 1 x 16 ohm jack, 2 x 8 ohm jacks, 2 x 4 ohm jacks
- ¼" Line Out
- Cabinet made of 15 ply, 18mm void-free plywood construction
No comments:
Post a Comment